WebIO 7 - Sales

Internet Device Gateway/Server

The WebIO-7 Server is the newest and most powerful model of the WebIO family of Internet automation servers.

WebIO7 Rev3, is the first available revision of WebIO7 in limited production. A new rev4 is currently in design phase with the only expected difference between rev3 and rev4 consisting of a few hardware changes that allow for a lower cost manufacturing process. Firmware features for rev3 and 4 are expected to be identical.

Since Rev3 firmware development has been on going since 2015, the firmware is very stable. A few firmware features are still not yet complete (See list below).
New firmware updates are occasionally made available and can be found in the firmware history page.

WebIO7 Rev3 Sales

WebIO7 is available for purchase.
The WebIO7 Server includes a 30 day satisfaction guarantee.
It is recommended that customers have a basic knowledge of TCP/IP networking. WebIO setup is simple for anyone who can configure a home Internet router.
Key Eleven WebIO sales are handled via PayPal.
Standard shipping is via USPS Priority Mail to USA addresses only.

WebIO7 Rev3. February 2015.

Rev3 Pre-release Features

The table below lists completion state of WebIO7 firmware features. Last update: 12/27/2017

#	Feature	Completion	Notes
1	Relays	90%	Power On initial state not yet configurable. Currently set to last set state.
2	Inputs	100%	Inputs for monitor, automation and notification complete.
3	X10	100%	X10 control only, supports TW523 compatible transceivers and the X10 Firecracker wireless transmitter
4	Wireless Outlets	100%	Currently supports control of 6 unique addressed wireless outlets. Any number of outlets can use the same address.
5	Wireless Temperature	100%	Only Oregon Sensors, protocol v2. Support of Oregon protocol v3 and support for another brand of sensors expected at a later date.
6	Automation	90%	Internal automation integrates wireless temperature and wired inputs for controlling relays, wireless outlets, X10, sending HTTP messages, and SMTP EMail. Not yet complete is UDP messages and Time based automation.
7	Web Interface	100%	HTTP web interface complete, with password security.
8	Android app	90%	An android app is available on WebIO7 website, not yet available no the Google play store.
9	iPhone app	0%	not complete.
10	Notification	0%	Will include Android and Apple iPhone/iOS notification on events
11	Email	100%	WebIO7 Automation can send SMTP email notification on sensor events. This does not support SSL, POP or IMAP email. Proxy server (WebIO7.com) email support expected at a later date. Email via WebIO-TM PC app is supported. Email messages currently contain minimal sensor event info and maybe expanded at a later date. SMTP port is selectable (commonly 25).
12	PC Software	90%	Currently compatible with WebIO-TM (Temperature Monitor) software. New PC app features expected at a later date.
13	IP	100%	TCP/IP setup complete, allows for static IP and dynamic/DHCP addressing. Also supports DNS static or dynamic and configurable MAC
14	DDNS	0%	Dynamic DNS support has been removed. It is probably best to use your routers DDNS features instead.
15	Firmware Updates	100%	Firmware updates over Ethernet completed and tested for application code and internal web pages.
16	Firmware Update #2	90%	Firmware update of wireless protocol code complete. Requires serial cable. A PC app to simplify this update process is expected at a later date
17	WebIO7.com web app	90%	Optional use of WebIO7.com web app. WebIO7 updates WebIO7.com user account with status info and basic events. Update of most events can optionally be turned off.