WebIO 7

Firmware Change History

WebIO7 contains 3 firmware images that can be updated.

  • Main functional code - firmware is updated over Ethernet
  • Internal Web pages - web pages are updated over Ethernet
  • Wireless receiver protocols and X10 protocol (W7-Auxiliary)- firmware is updated over serial COM port


WebIO7 Embedded Firmware

WebIO7 Firmware Change History

DateFirmwareVersionNotes
7/25/2017W7-Main071 WebIO7 main processor. Fix for user setting of WebIO7 static IP address. Allow for user setting of WebIO7 HTTP port. (To set IP address: set WebIO7 switch to unlock, set IP address in Network settings, select [Save] button - old IP settings will re-appear, Lock WebIO7, Reboot - now new settings are in effect and appear on Network page). Reboot of WebIO7 in unlock position will restore IP address to using DHCP.
WebIO7-FirmwareV071.zip (7/25/2017)
4/02/2016W7-Web068b WebIO7 internal webserver pages. Added "on" and "off" labels to Relay control page for more clear identification of relay state where "A on" means the relay NOT in energized state, "B on" indicates relay is in energized state. The "on" "off" labels are also used by the android app.
WebIO7-FirmwareV068c.zip (4/02/2016)
12/13/2015W7-Main068 WebIO7 main processor. Base features release. Features: Relays, Inputs, X10, Wireless Control, Wireless Temperature, Automation, Email, UDP events, HTTP events, Firmware updates via Ethernet
12/15/2016W7-Auxiliary43 Adds X10 "All Units Off", "All Lights On", "All Lights Off" commands. Note that these commands are not supported by all X10 devices. "All Lights On/Off" commands are usually only supported by X10 Lamp Modules.